Tilers Costs in Kapiti Coast
2026 pricing guide · Wellington region
Tilers Hourly Rates in Kapiti Coast
Hourly Rate
$55 – $85
per hour + GST
Rates are indicative for Kapiti Coast in 2026. Actual costs vary by job complexity and provider.
Common Tilers Jobs & Costs in Kapiti Coast
| Job | Low | High | Unit |
|---|---|---|---|
| Bathroom floor tiling | $1,000 | $3,000 | per job |
| Bathroom wall tiling | $2,000 | $5,000 | per job |
| Kitchen splashback | $800 | $2,000 | per job |
| Full bathroom tiling (floor + walls) | $3,000 | $8,000 | per job |
| Outdoor patio / courtyard tiling | $1,500 | $5,000 | per job |
| Laundry floor tiling | $600 | $1,500 | per job |
| Re-grouting existing tiles | $300 | $800 | per job |
Prices are estimates for Kapiti Coast in 2026 and include labour. Material costs may be additional depending on the job. All prices exclude GST unless stated. Get free quotes from tilers in Kapiti Coast for accurate pricing.
What Affects Tilers Costs in Kapiti Coast?
- •Tile type and size -- large-format tiles (600x600mm+) take fewer tiles but need a perfectly level substrate. Natural stone costs more to supply and install than ceramic or porcelain.
- •Surface preparation -- waterproofing, levelling, and substrate repair add to the cost, especially in older bathrooms.
- •Waterproofing requirements -- wet areas (showers, bathroom floors) must be waterproofed to NZ Building Code standards before tiling.
- •Tile layout pattern -- herringbone, diagonal, and complex mosaic patterns take longer to install than a standard grid layout.
- •Waste factor -- unusual room shapes and large tiles create more waste (typically 10-15% extra material needed).
- •Whether the tiler supplies tiles or you do -- tilers who supply tiles may add a margin, but they know which tiles are quality and easy to work with.
Tips to Save on Tilers Costs
- 1Supply your own tiles to save on the tiler's margin, but check with your tiler first on quality and suitability.
- 2Choose a standard tile size (300x300mm or 300x600mm) and a simple grid layout to minimise labour time.
- 3Buy tiles during sales at Tile Warehouse, Tile Depot, or similar retailers -- end-of-line stock can be 30-50% cheaper.
- 4Retile the shower area only instead of the full bathroom if budget is tight -- this is the area most prone to water damage.
- 5Ask about epoxy grout for shower areas -- it costs more but is waterproof, stain-proof, and eliminates the need for regular re-grouting.
- 6Get the waterproofing and tiling done by the same contractor to avoid disputes about responsibility if leaks occur.
NZ Regulations for Tilers
Tiling itself is not classified as restricted building work in New Zealand. However, waterproofing of wet areas (showers, bathrooms) is considered restricted building work under the Building Act 2004 and should be carried out or supervised by a Licensed Building Practitioner (LBP). Wet area waterproofing must comply with NZ Building Code clause E3 (Internal Moisture) and the NZ Standard for wet area membrane systems (AS/NZS 4858). Building consent may be required if the tiling is part of a larger bathroom renovation. The New Zealand Certified Builders (NZCB) and the Building and Construction Industry Training Organisation (BCITO) provide qualifications in tiling and waterproofing.
Tilers Costs in Kapiti Coast — FAQ
Full bathroom tiling in Kapiti Coast (floor and walls) costs between $3,000 and $8,000, depending on the bathroom size, tile type, and amount of preparation work needed. This typically includes waterproofing, tiling, and grouting. Supply-only tiles cost $20 to $150/sqm depending on the material.