Heat Pump Electricians in Wellington

The electrical connection for a heat pump in New Zealand typically costs $400 to $1,200, separate from the heat pump unit and HVAC installation. A standard wall-mounted split system needs a dedicated circuit from the switchboard and an isolating switch outside. If your switchboard needs additional capacity or the cable run is long, costs increase. Multi-split systems or ducted systems with higher electrical loads may cost $800 to $2,000 for the electrical work alone.

Heat pumps in New Zealand require a dedicated electrical circuit from the switchboard (not shared with other appliances), a correctly rated MCB (miniature circuit breaker), a weather-rated isolating switch within one metre of the outdoor unit, and appropriate cable sizing for the load and cable run length. The outdoor unit must be positioned where it has adequate airflow and where the electrical and refrigerant connections can be made safely. Your electrician will coordinate with the heat pump installer for the electrical requirements.

Correct heat pump sizing is essential for efficient operation in Wellington. A unit too small will struggle to heat your space; too large and it will cycle on and off inefficiently. As a rough guide, allow 100 to 120 watts per square metre for a well-insulated room and 120 to 150 watts for a poorly insulated room. A typical New Zealand lounge of 30 square metres needs a 3 to 5 kW heat pump. Popular brands in NZ include Mitsubishi Electric, Daikin, Fujitsu, Panasonic, and Hitachi.

The electrical work for heat pump installation must be done by an EWRB-registered electrician. The refrigerant work must be done by a qualified HVAC technician. A Certificate of Compliance must be issued for the electrical work. The installation must comply with AS/NZS 3000 wiring rules and the manufacturer's installation requirements. Some councils also have noise rules for outdoor units — check with your local council for noise limits at the boundary.