Gas Safety Inspectors in Lower Hutt

A gas safety inspection in New Zealand costs $150 to $400 depending on the number of gas appliances and the complexity of the installation. A basic inspection of a single gas appliance (hob or hot water) costs $150 to $250. A comprehensive whole-house inspection covering all gas appliances, pipework, and venting costs $250 to $400. If repairs are needed to bring the installation up to compliance, these are quoted separately. A Gas Safety Certificate is issued after a successful inspection.

You should get a gas safety inspection when buying a property with gas appliances (include it in your pre-purchase building inspection), if you suspect a gas leak (call 111 first if you smell gas), if your gas appliances have not been serviced in over two years, if you notice yellow or orange flames instead of blue on gas burners, if you smell gas near appliances even when they are off, before reletting a rental property with gas appliances, and after any earthquake above magnitude 5.0 that may have damaged gas pipes.

A comprehensive gas safety inspection includes testing all gas pipework for leaks using a pressure test, checking gas pressure at each appliance, inspecting all gas appliances for correct operation, checking flues and venting for blockages and correct termination, verifying adequate ventilation for gas appliances, checking that all connections comply with NZS 5261, and inspecting gas meters, regulators, and isolation valves. The gasfitter will provide a written report identifying any safety issues.

While New Zealand does not currently have a mandatory gas safety check for rental properties (unlike the UK), landlords have a legal duty under the Residential Tenancies Act to maintain rental properties in a reasonable state, including gas appliances. The Health and Safety at Work Act 2015 also applies. Regular gas inspections protect tenants, reduce liability, and ensure appliances operate safely and efficiently. Many insurance companies also require evidence of gas compliance.